Click image to zoom
Disc Brake Conversion Kit, 1955-1956 Plymouth, Dodge With 10" Power Brakesfor 1955–1956 Plymouth
$1995.00
Note: Please measure and ensure minimum of 13 1/4" clearance on narrowest part of back side of wheel (see photo)
This comprehensive kit that bolts directly to your stock Mopar spindles, ensuring a seamless upgrade. Clear and concise installation instructions are included making this kit a viable DIY project for anyone with moderate mechanical skills. Made in the USA, these kits include:
- GM power brake booster & dual circuit master cylinder that bolts right up to the stock booster mounting position, puts the brake pedal right where it’s supposed to be
- Aluminum hubs with grease caps
- New rotors and 'big piston' calipers and pads
- All mounting bolts, seals, bearings, caliper mounting brackets, and attaching hardware
- Flexible brake hoses
- All bracketing and hardware for master cylinder installation
- Correct metering valves for residual pressure
- Installation instructions
Note: Stock wheels may require modification to fit. Compatible with late model Mopar and aftermarket wheels. You may also want - 3/16"" hard brake lines and brake light switch which we offer separately. Shipping cost varies by location.
Have a question?
We're here to help. Our team of knowledgeable experts is ready to assist you with any inquiries you may have about your project. Whether you need guidance on installation, troubleshooting advice, or simply want to ensure you're ordering the correct part, we've got you covered. With years of experience in the industry, our specialists can provide personalized recommendations and solutions to help you complete your project with confidence. Don't hesitate to reach out – we're just a call or message away!
